Showing posts with label projects. Show all posts
Showing posts with label projects. Show all posts

Sunday, June 1, 2014

Lofty ambition

We have a smallish house, with smallish rooms and kids who are only getting bigger. Since an addition to the house isn't feasible, we decided to make use of the space above by building the kids loft beds, with built in dressers and bookshelves and space for a desk underneath.

We started with this plan for a twin sized loft bed. We decided to scrap the desk part, because it is kind of small and the kids have pretty decent desks already. We also made both sides be full shelves, instead one being short. Additionally, we went with full sized beds instead of twin, since the kids are only going to get bigger.  Making it full sized added 15 inches to all cross pieces, because full sized beds are the same length, just slightly wider, than twin sized. 

We started by buying piles of wood, screws, and gallons of polyurethane. Seriously, save yourself the headache and buy the gallon size. I went back 4 times to get more because I kept saying "nah, I've got enough, it's totally fine" I did not have enough and it was not totally fine! 

And getting the kids started early on learning how to make things.  


If you buy the better quality lumber, you don't have to do nearly as much sanding. Of course, that costs more money. For us, I had more time than money, so I bought the cheap stuff and sanded it smooth. We ended up spending about $200 in material and two solid weekends building it. Probably a minimum of 20 hours, between the two of us. But, the comparable bed from <a href=http://www.pbteen.com/products/girls-sleep-and-study-loft/>Pottery Barn</a> cost $1500, plus shipping, so I feel like we still came out ahead. 

Then we built two boxes


And added shelves. 


Then we built the head and footboards. The plans call for 1x3s and if you can afford decent lumber, they are fine. We bought the cheapest crap they had and I was disappointed in the final product. For this bed, we talked about getting better 1x3s, but they were a lot more per board and we ended up going with cheap 1x4s and they were much better and cheaper. 



We had to make sure to leave spaces for the cross brace pieces, which took forever, to get each piece lined up and flush and then attached and then spaced correctly, etc. You can see at the corner of this picture some spacers that RF made. They were really useful and made it go a lot faster. 


Then we attached the headboards to the bookshelves and took the two pieces into the bedroom. We attached the rails and cross brace pieces. 


The pieces that hold the slats and the mattress are supposed to be 2x4s but that makes the mattress too tall and puts the kids right into the ceiling fan, so we decided on 2x2s instead. 


Then the slats are attached and trim is added above the rail pieces. 


This picture doesn't have the ladder on yet, because using the 1x4s makes the ladder easier to climb and makes it feel more secure but proved to be a problem to cut with our 10" radial arm saw. The blade just wasn't quite big enough to cut all the way through. We eventually got it but it took a lot more finagling than the rest of the bed. 

We decided to use fabric baskets instead of drawers for the dresser end, because they have to be custom fit and cost a fortune! The shelves each hold 4 baskets, so they could conceivably have 16 different baskets, if they needed them. WF had a chest high four drawer dresser and everything that came out of it fit in these four baskets, so they hold a lot more than you might think. It does get kind of dark under the bed, so I'm hoping to not fill all the shelves so at least some light can get in rio round the shelves. 


His desk that he already had fits perfectly under it and my parents had a chair (not that monster in the other picture. It's a cute little club chair) that fits in the corner, by the tv and eventually, we will get them wall mounted TVs, so the only thing on the floor, will be the bed. 

The only problem is, they have a lot more visible floor, so they have less place to stash junk and I'm on them to keep it clean a lot more! 

We still need to get his mattress ordered.  We got her's from Walmart and it is super comfortable. It cost $150 and comes shipped like this:

And you'd really expect it to be junk, but she loves it and says she sleeps so well on it. We'll be getting him one as well, it will just be a little bit before we get it ordered. 

We will also add "ground effects" to the underside of the bed, to act as a nightlight and to add a little light in the desk area. These are on her bed. An 18 foot string of white rope lights from Big Lots fits perfectly around the inside. 



Friday, August 13, 2010

Kitchen remodel

Part of the reason we wanted to buy this house was that there was nothing that HAD to be done to move in. There were, and still are, things we want to do but we didn't have to do anything to be able to live here. The kitchen was probably the ugliest part of the house but it still wasn't that bad.



Because the living room and kitchen are all one big space, we had J and K Painting go ahead and do the kitchen the same color as the living room, which is Latte. As it was going on, I kept thinking "This is ok", then it started to dry and looked almost chocolate and I didn't like I would be able to tolerate it. Once it dried completely, it was a nice medium brown color that really looks great with the white of the cabinets.




You can sort of see the sink in the above picture but what you can't see is that it was a beat up, white porcelain mess that didn't have a sprayer or a garbage disposal. The faucet was too low to be able to fill my tea pitcher with and it was a very shallow sink. I was able to put one bowl and one plate in the sink before it looked like it was overflowing.






Somewhere along the line, I got signed up for ReStore newsletter and I told RF I wanted to check it out a couple of weeks ago, while we were looking for a table. Worst case, they had nothing and we had wasted 20 minutes. While we were there, we saw that they had some pretty decent stainless steel sinks. We ended up picking one up for $15. We got it all apart this morning and I threw it in the bathtub and scrubbed it clean. It looks almost brand new! We had planned to use the hardware that was on the current sink because while it wasn't the latest, greatest, it was here and it didn't cost any extra money. While we were out getting a few things last night, I ran across a nice high neck faucet that came with a sprayer. It was in brushed nickel so it looks like it matches the sink pretty well.

RF and my FIL spent the morning getting it all installed







And installing my fancy new garbage disposal. We run into old school copper pipe so FIL recommended a better grind and one that was safe for septic systems. We got it and are just waiting for him to run power to it.


Wednesday, August 4, 2010

My super fab table

Since I haven't really had a dining room in 7 years, I haven't had a dining room table, either. The table that RF and I had when we were first married is s small, cafe type table, with a glass top that I never thought would work well with kids. We've just used TV trays or lap desks on the floor and it has been fine. Since our new house has an eat in kitchen, we decided we needed an actual table to eat at. I have a friend that owns some property and she said to me one day "I had a tenant move out and leave a bunch of stuff behind and one of the things is a table, do you want it?" I said sure since free is free, even if it is junk.

We picked it up and the side rails (made of crappy pressboard, you can see the cracks in the first two pictures) were cracked at the screw holes and the top was a mess. The top was real wood though and I decided that I could give refinishing it a shot. I called my FIL and got his electric sanders and RF and I went to town on it. This picture is right after we started sanding for the first time



When RF was dragging it out the second day, he pulled one of the legs off because the press board was cracked under there too. He sent me to Menard's to get 2x4s and have them cut to fit the table. He attached them for me and we were ready to paint. This picture is after the final sanding.




After it was completely sanded, I had to wipe it all down with mineral spirits to get all the dust off and then I put on 3 coats of varnish to the top and sides (I felt like it could use another couple so it was all perfectly glass like and smooth, but 3 was really plenty). After that was all dry, we flipped it over on some towels and painted the legs and the new side rails white. This is the final picture. As soon as I get all the boxes out of my kitchen, it is ready to be used. Total cost of the table: $15. Total time investment:5 hours.




Now that I have figured out that it is oh so easy to refinish a table, I'm having RF take apart my OLD ugly dark wood end tables that my parents bought when I was about 3 and then gave to me when I moved out 10 years ago and I'm redoing them in a nice light color.

Tuesday, August 3, 2010

Final picture

A couple of days ago, I posted pictures of MF's room in the new house and the new wall we had to put in. We finally painted it last night and it is ready to be moved into. It is pink and purple and she will be putting up pink princess and castle wall stickers like these in a few weeks. If you look over the door, you can see a little bit of the pink that we did 2 walls in.

Saturday, July 31, 2010

The joys of homeowner ship

We closed on our house today. They said the closing would take about an hour but of course, that was a dirty lie. First they had the wrong number on some form so she had to fix it. While she was fixing it, the bank emailed her and said "oops, the closing cost you have is wrong, fix it and we'll approve it later" So it ended up taking 2.5 hours but we got it done and it was fine.

The plan for the weekend was to prep the kids' room for paint today, paint part tomorrow and the rest on Sunday, since MF wanted walls that were 2 different colors.

In order to do that, we needed to rip down the panelling that was in her room because it was UGLY. So we got in there and started ripping down the panelling about noon. The first wall came down, no problem. There were a million nail holes but I've worked mud before so I knew what I was doing with that. Then we got to the second wall. Evan started pulling the panelling down, to find that they used glue on it and instead of coming off and leaving a few nail holes, it was tearing off chucks of drywall with it.




I called my friend who is going to help us paint tomorrow and asked her if she thought the wall was salvageable and she said she really didn't think so, that when they have walls that look like that, they end up replacing the drywall. I decided that drywall isn't rocket science so we headed to Lowes and bought stuff to drywall with (including the knife, putty knife, etc because we really have nothing). We got started tearing down the old drywall about 4:30. We had it down to bare studs by 8



After we ate, we cleaned up some of the mess and started cutting and hanging the new. A few minor hiccups, like my not holding the top board tight enough so one side drooped a little and had to be moved, later and we had a wall. While Evan put in a million screws, I patched the nail holes in the other wall and then did the screws on our brand new drywall. We need to tape and mud and sand tomorrow but once that is done, the wall will be ready to paint. Since MF has now decided that she doesn't want 2 different colors on each wall, it will be a lot easier to do and we should be able to handle it ourselves. We finished all the mud up about 10, so a total of hour 6 hours work.



The new plan is to paint as much as we can tomorrow and spend Sunday cleaning the carpets and scrubbing the garage floor and so forth.